RICOH Online Configurator

RICOH MP 2555 (ARDF)/MP 3055 (ARDF)/ MP 3555 (ARDF)/MP 3055 (SPDF)

Multifunction B&W (ARCHIVED)

The MP 2555 (ARDF)/MP 3055 (ARDF)/ MP 3555 (ARDF)/MP 3055 (SPDF) multifunction b&w systems put usability front and center – because today's workflows demand it. These top-of-the-line units are ideal for fast-paced environments that depend on sophisticated features to support complex workflows. They come standard with PostScript3 Emulation, offer exceptional MFP functionalities and 1200 x 1200 dpi image quality for fine lines, razor sharp text, and the most accurate grayscales. Plus, different paper capacity options give users the flexibility to load multiple stocks and sizes at the same time. With a full line of finishing capabilities, support for mobile device printing, and a robust processor, users can perform everyday office tasks with ease. And they can do it all without compromising security or their commitment to the environment.

Please Note:

Selected items that require additional options will automatically be selected.
Some items are not compatible with other options. Non-compatible options will be disabled from selection.
Millimeters are rounded up to the nearest one.

Step 1: Main Unit

	Item/Description	Tips	Item #
Main Unit
	MP 2555 with ARDFMP 2555 with ARDF This main unit comes standard with a 100-Sheet Automatic Reversing Document Feeder. Output Speed (Letter): 25-ppm Recommended Monthly Volume: 4,000 impressions/month Maximum Monthly Volume: 15,000 impressions/month Power Requirements: 110-120V, 60Hz, 12A - the required wall outlet is a NEMA 5-15R (receptacle) Weight: 156.5 lbs. (71 kg) Dimensions include ARDF: W × D × H (inches): 23.1 × 26.9 × 35.9 W × D × H (mm): 587 × 683 × 912	No tooltip available.	417920
	MP 3055 with ARDFMP 3055 with ARDF This main unit comes standard with a 100-Sheet Automatic Reversing Document Feeder. Output Speed (Letter): 30-ppm Recommended Monthly Volume: 5,000 impressions/month Maximum Monthly Volume: 20,000 impressions/month Power Requirements: 110-120V, 60Hz, 12A - the required wall outlet is a NEMA 5-15R (receptacle) Weight: 156.5 lbs. (71 kg) Dimensions include ARDF: W × D × H (inches): 23.1 × 26.9 × 35.9 W × D × H (mm): 587 × 683 × 912	No tooltip available.	417921
	MP 3055 with SPDFMP 3055 with SPDF This main unit comes standard with a 220-Sheet Single Pass Document Feeder. Output Speed (Letter): 30-ppm Recommended Monthly Volume: 5,000 impressions/month Maximum Monthly Volume: 20,000 impressions/month Power Requirements: 110-120V, 60Hz, 12A - the required wall outlet is a NEMA 5-15R (receptacle) Weight: 168.6 lbs. (76.5 kg) Dimensions include SPDF: W × D × H (inches): 23.1 × 26.9 × 37.9 W × D × H (mm): 587 × 683 × 963	MP 3055 with SPDF The item(s) below are not compatible with this option and cannot be selected: Marker Type 30 (334049)	417929
	MP 3555 with ARDFMP 3555 with ARDF This main unit comes standard with a 100-Sheet Automatic Reversing Document Feeder. Output Speed (Letter): 35-ppm Recommended Monthly Volume: 7,000 impressions/month Maximum Monthly Volume: 30,000 impressions/month Power Requirements: 110-120V, 60Hz, 12A - the required wall outlet is a NEMA 5-15R (receptacle) Weight: 156.5 lbs. (71 kg) Dimensions include ARDF: W × D × H (inches): 23.1 × 26.9 × 35.9 W × D × H (mm): 587 × 683 × 912	No tooltip available.	417922

Step 2: Paper Tray & Optional Accessories

Item/Description	Tips	Item #
Paper Feed Unit PB3250Paper Feed Unit PB3250 Lowers the total machine height, making it easy for all users to access the device (Section 508). Provides an additional 550 sheets. Paper sizes up to 11" x 17". Paper weights up to 80 lb. Bond/166 lb. Index (300g/m²). Weight: 24 lbs. (10.9 kg) W × D × H (inches): 23.1 × 27 × 4.7 W × D × H (mm): 587 × 686 × 119 Note: 1. By choosing this option, the Caster Table Type M3 will be added to your configuration. 2. Paper Feed Unit PB3250 cannot be installed with Paper Feed Unit PB3220, LCIT PB3260, LCIT RT3030, Cabinet Type F, Hybrid Finisher SR3210, Booklet Finisher SR3220, or any related options.	Paper Feed Unit PB3250 The item(s) below will be selected if this item is selected: Caster Table Type M3 (416737) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3220 (417268) LCIT PB3260 (408116) LCIT RT3030 (416548) Cabinet Type F (100478FNG) Hybrid Finisher SR3210 (417483) Booklet Finisher SR3220 (417484) Bridge Unit BU3070 (417587) Punch Unit PU3050NA (416609)	408114
Caster Table Type M3Caster Table Type M3 The caster table must be added to the configuration when the Paper Feed Unit PB3250 is selected. It provides a platform with wheels to easily move the device. Note: 1. Paper Feed Unit PB3250 must be selected to add this option. 2. Caster Table Type M3 cannot be installed with Paper Feed Unit PB3220, LCIT PB3260, LCIT RT3030, Cabinet Type F, Hybrid Finisher SR3210, Booklet Finisher SR3220, or any related options.	Caster Table Type M3 At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3250 (408114) The item(s) below will be selected if this item is selected: Paper Feed Unit PB3250 (408114) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3220 (417268) LCIT PB3260 (408116) LCIT RT3030 (416548) Cabinet Type F (100478FNG) Hybrid Finisher SR3210 (417483) Booklet Finisher SR3220 (417484) Bridge Unit BU3070 (417587) Punch Unit PU3050NA (416609)	416737
Paper Feed Unit PB3220Paper Feed Unit PB3220 Provides an additional 1,100 sheets. Paper sizes up to 11" x 17". Paper weights up to 80 lb. Bond/166 lb. Index (300 g/m²). Weight: 48.5 lbs. (22 kg) W × D × H (inches): 23.1 × 27 × 9.7 W × D × H (mm): 587 × 686 × 246 Note: Paper Feed Unit PB3220 cannot be installed with Paper Feed Unit PB3250, Caster Table Type M3, LCIT PB3260, Cabinet Type F, or any related options.	Paper Feed Unit PB3220 The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3250 (408114) Caster Table Type M3 (416737) LCIT PB3260 (408116) Cabinet Type F (100478FNG)	417268
LCIT PB3260LCIT PB3260 Provides an additional 2,000 sheets. Paper sizes up to 8.5" x 11"/A4. Paper weights up to 80 lb. Bond/166 lb. Index (300 g/m²). Weight: 48.5 lbs. (22 kg) W × D × H (inches): 23.1 × 27 × 9.7 W × D × H (mm): 587 × 686 × 246 Note: Paper Feed LCIT PB3260 cannot be installed with Paper Feed Unit PB3250, Caster Table Type M3, Paper Feed Unit PB3220, Cabinet Type F, or any related options.	LCIT PB3260 The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3250 (408114) Caster Table Type M3 (416737) Paper Feed Unit PB3220 (417268) Cabinet Type F (100478FNG)	408116
LCIT RT3030LCIT RT3030 Provides an additional 1,500 sheets. Paper sizes up to 8.5" x 11"/A4. Paper weights up to 80 lb. Bond/166 lb. Index (300 g/m²). Weight: 21.6 lbs. (9.8 kg) W × D × H (inches): 13.4 × 21.4 × 11.4 W × D × H (mm): 340 × 544 × 290 Note: 1. LCIT RT3030 cannot be installed with Paper Feed Unit PB3250, Caster Table Type M3, or Cabinet Type F. 2. LCIT RT3030 must be configured with Paper Feed Unit PB3220 or LCIT PB3260.	LCIT RT3030 At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (417268) LCIT PB3260 (408116) The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3250 (408114) Caster Table Type M3 (416737) Cabinet Type F (100478FNG)	416548
Cabinet Type FCabinet Type F Provides businesses with a convenient option for the storage of supplies and paper, and raises the device to the optimum height. Can only be configured with the standard configuration. Weight: 32.3 lbs. (14.7 kg) W × D × H (inches): 23.1 × 26.7 × 10 W × D × H (mm): 587 × 678 × 254 Note: Cabinet Type F cannot be installed with Paper Feed Unit PB3250, Caster Table Type M3, Paper Feed Unit PB3220, LCIT PB3260, or LCIT RT3030.	Cabinet Type F The item(s) below are not compatible with this option and cannot be selected: Paper Feed Unit PB3250 (408114) Caster Table Type M3 (416737) Paper Feed Unit PB3220 (417268) LCIT PB3260 (408116) LCIT RT3030 (416548)	100478FNG

Step 3: Output & Finishing Options

	Item/Description	Tips	Item #	Thumbnail
Internal
	One-Bin Tray BN3110One-Bin Tray BN3110 Provides an additional output tray above the standard Internal Tray or optional Bridge Unit/Internal Finisher. Holds 125 sheets. Allows users to separate print/fax output from copy. Supports paper sizes up to 11" x 17". Weight: 3.1 lbs. (1.4 kg) W × D × H (inches): 17.5 × 17.7 × 5.9 W × D × H (mm): 445 × 450 × 150	No tooltip available.	417585
	Internal Finisher SR3180 (Stapleless)Internal Finisher SR3180 (Stapleless) 250-Sheet Stapleless Internal Finisher with staple-less finishing up to 5 sheets (20 lb. Bond). Paper sizes up to 11" x 17". Weight: 21.6 lbs. (9.8 kg) W × D × H (inches): 17.1 × 20.3 × 5.9 W × D × H (mm): 434 × 516 × 150 Note: Internal Finisher SR3180 cannot be installed with Internal Finisher SR3130, Hybrid Finisher SR3210, Booklet Finisher SR3220, or any related options.	Internal Finisher SR3180 (Stapleless) The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3130 (417589) Hybrid Finisher SR3210 (417483) Booklet Finisher SR3220 (417484) Bridge Unit BU3070 (417587) Punch Unit PU3040NA (416615) Punch Unit PU3050NA (416609) Staple Set Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) (415009) Staple Refill Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) (415010) Staple Set Type S for SR3220 (Normal and Saddle Stitch) Uses Type K Refill (412874) Staple Refill Type K for SR3220 (Normal and Saddle Stitch) (410802)	417593
	Internal Finisher SR3130Internal Finisher SR3130 500-Sheet Internal Finisher provides multi-position stapling and optional hole-punching. Recommended for offices with limited floor space. Supports paper sizes up to 11" x 17". Weight: 28.2 lbs. (12.8 kg) W × D × H (inches): 21.5 × 20.6 × 6.7 W × D × H (mm): 546 × 523 × 170 Note: Internal Finisher SR3130 cannot be installed with Internal Finisher SR3180, Hybrid Finisher SR3210, Booklet Finisher SR3220, or any related options.	Internal Finisher SR3130 The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3180 (Stapleless) (417593) Hybrid Finisher SR3210 (417483) Booklet Finisher SR3220 (417484) Bridge Unit BU3070 (417587) Punch Unit PU3050NA (416609) Staple Set Type S for SR3220 (Normal and Saddle Stitch) Uses Type K Refill (412874) Staple Refill Type K for SR3220 (Normal and Saddle Stitch) (410802)	417589
External
	Item/Description	Tips	Item #	Thumbnail
	Hybrid Finisher SR3210Hybrid Finisher SR3210 1,000-Sheet Hybrid Finisher. For offices that produce collated and stapled sets of documents, the SR3210 helps shorten production time. It offers 50-sheet, multi-position stapling, mixed-size stapling, optional hole-punching, and shift-sort collating, as well as a staple-less binding capability of up to 5 sheets. Supports paper sizes up to 11" x 17". Weight: 60 lbs. (27 kg) W × D × H (inches): 22.2 × 24.4 × 37.8 W × D × H (mm): 564 × 620 × 960 Note: 1. By choosing this option, the Bridge Unit BU3070 will be added to your configuration. 2. One of the following Paper Feed Units must be selected to add this finisher: Paper Feed Unit PB3220, LCIT PB3260, or Cabinet Type F. 3. Hybrid Finisher SR3210 cannot be installed with Paper Feed Unit PB3250, Caster Table Type M3, Internal Finisher SR3130, Internal Finisher SR3180, Booklet Finisher SR3220, or any related options.	Hybrid Finisher SR3210 At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (417268) LCIT PB3260 (408116) Cabinet Type F (100478FNG) The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3180 (Stapleless) (417593) Internal Finisher SR3130 (417589) Booklet Finisher SR3220 (417484) Punch Unit PU3040NA (416615) Staple Set Type S for SR3220 (Normal and Saddle Stitch) Uses Type K Refill (412874) Staple Refill Type K for SR3220 (Normal and Saddle Stitch) (410802)	417483
	Booklet Finisher SR3220Booklet Finisher SR3220 1,000-Sheet Booklet Finisher. Allows documents to be professionally finished as paginated, saddle-stitched booklets. It provides three destinations for output, and offers optional hole-punching. Ideal for the production of program guides, instruction sheets, newsletters, and meeting agendas. Supports paper sizes up to 11" x 17". Weight: 87.3 lbs. (40 kg) W × D × H (inches): 22.2 × 24.4 × 37.8 W × D × H (mm): 564 × 620 × 960 Note: 1. By choosing this option, the Bridge Unit BU3070 will be added to your configuration. 2. One of the following Paper Feed Units must be selected to add this finisher: Paper Feed Unit PB3220, LCIT PB3260, or Cabinet Type F. 3. Booklet Finisher SR3220 cannot be installed with Paper Feed Unit PB3250, Caster Table Type M3, Internal Finisher SR3130, Internal Finisher SR3180, Hybrid Finisher SR3210, or any related options.	Booklet Finisher SR3220 At least one of the item(s) below must be selected to be able to select this item: Paper Feed Unit PB3220 (417268) LCIT PB3260 (408116) Cabinet Type F (100478FNG) The item(s) below are not compatible with this option and cannot be selected: Internal Finisher SR3180 (Stapleless) (417593) Internal Finisher SR3130 (417589) Hybrid Finisher SR3210 (417483) Punch Unit PU3040NA (416615) Staple Set Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) (415009) Staple Refill Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) (415010)	417484
	Bridge Unit BU3070Bridge Unit BU3070 A required accessory when the main unit is configured with an external finisher. The Bridge Unit transports pages from the standard exit area into a Finisher for inline stapling or hole-punching. Note: Hybrid Finisher SR3210 or Booklet Finisher SR3220 must be selected to add this option.	Bridge Unit BU3070 At least one of the item(s) below must be selected to be able to select this item: Hybrid Finisher SR3210 (417483) Booklet Finisher SR3220 (417484)	417587
Hole-Punching Options
	Item/Description	Tips	Item #	Thumbnail
	Punch Unit PU3040NAPunch Unit PU3040NA Optional hole punching for the Internal Finisher SR3130. Supports Paper Sizes up to 11" x 17". Note: Internal Finisher SR3130 must be selected to add this option.	Punch Unit PU3040NA At least one of the item(s) below must be selected to be able to select this item: Internal Finisher SR3130 (417589)	416615
	Punch Unit PU3050NAPunch Unit PU3050NA Optional hole punching for the Hybrid Finisher SR3210 or Booklet Finisher SR3220. Supports Paper Sizes up to 11" x 17". Note: Hybrid Finisher SR3210 or Booklet Finisher SR3220 must be selected to add this option.	Punch Unit PU3050NA At least one of the item(s) below must be selected to be able to select this item: Hybrid Finisher SR3210 (417483) Booklet Finisher SR3220 (417484)	416609

Step 4: Print/Scan Options

	Item/Description	Tips	Item #	Thumbnail
Network Environment
	IEEE802.11a/g/n Interface Unit Type M19IEEE802.11a/g/n Interface Unit Type M19 Allows MFP device to connect to the network over WiFi. Useful for temporary sites and locations where cabling is impractical. Note: IEEE802.11a/g/n Interface Unit Type M19 cannot be installed with Extended USB Board Type M19.	IEEE802.11a/g/n Interface Unit Type M19 The item(s) below are not compatible with this option and cannot be selected: Extended USB Board Type M19 (417566)	417493
	PostScript 3 Unit Type M29PostScript 3 Unit Type M29 Genuine Adobe^® PostScript^®3™. Recommended for printing more complex B&W and PDF files. The MP 2555/MP 3055/MP 3555 come with standard PostScript3 Emulation. This option is available for customers who require True Adobe® workflows like Photoshop^®, Illustrator^® and PDF/X as well as additional font support. When enabled on the MFP, the standard PostScript3 Emulation will be disabled.	No tooltip available.	417875
Printing/Scanning Features
	Item/Description	Tips	Item #	Thumbnail
	Extended USB Board Type M19Extended USB Board Type M19 Required for printing from USB Type B port. Note: Extended USB Board Type M19 cannot be installed with IEEE802.11a/g/n Interface Unit Type M19.	Extended USB Board Type M19 The item(s) below are not compatible with this option and cannot be selected: IEEE802.11a/g/n Interface Unit Type M19 (417493)	417566
	OCR Unit Type M13OCR Unit Type M13 This function embeds invisible text on scanned images of PDFs and enables users to search PDF files by arbitrary keywords. Searchable PDF files can be sent to email, folders, and external media (USB/SD). Supports blank page removal when scanning.	No tooltip available.	417428

Step 5: Fax Options

	Item/Description	Tips	Item #	Thumbnail
	Fax Option Type M29Fax Option Type M29 Installation required to enable fax services: 33.6 kbps, approximately 2 second transmission speed, standard JBIG, and standard 320 pages memory. Includes standard Internet Fax (T.37), LAN Fax, IP-Fax (T.38), Fax Forwarding to Email, and Paperless Fax function.	No tooltip available.	418601
	Memory Unit Type M19 (64MB)Memory Unit Type M19 (64MB) Increases fax memory to 2,240 pages and fax resolution to 400 x 400 dpi. Note: Fax Option Type M29 must be selected to add this option.	Memory Unit Type M19 (64MB) At least one of the item(s) below must be selected to be able to select this item: Fax Option Type M29 (418601)	MX417518RA

Step 6: Security & Miscellaneous Accessories

Item/Description	Tips	Item #
Optional Counter Interface Unit Type M12Optional Counter Interface Unit Type M12 20-pin interface used to attach external key counter or key card device.	No tooltip available.	417111
ESP XG-PCS-15DESP XG-PCS-15D Designed to provide a higher level of noise filtering and surge protection for devices that employ more sensitive and complex electronic components. Our Advanced Technical Support (ATS) recommends the use of power protection products to minimize potential electrical interference with products.	No tooltip available.	006428MIU
Smart Card Reader Built-in Unit Type M29Smart Card Reader Built-in Unit Type M29 This option is a cover and a card reader is not included. For use with RICOH & third party software solutions. The smart card reader and its cable will be covered inside the mainframe when this option is attached. If using another type of card reader be sure reader dimensions do not exceed 63.5mm × 106mm × 22mm in size. Not all card readers may be supported. Note: Smart Card Reader Built-in Unit Type M29 cannot be installed with SCR3310 v2 USB Smart Card Reader.	Smart Card Reader Built-in Unit Type M29 The item(s) below are not compatible with this option and cannot be selected: SCR3310 v2 USB Smart Card Reader (005269MIU)	417864
SCR3310 v2 USB Smart Card ReaderSCR3310 v2 USB Smart Card Reader This card reader is for US Federal Government CAC cards only. Card Reader only. No cards are provided. Used with Common Access Card (CAC)/Personal Identity Verification (PIV) Authentication Solution. Note: SCR3310 v2 USB Smart Card Reader cannot be installed with Smart Card Reader Built-in Unit Type M29.	SCR3310 v2 USB Smart Card Reader The item(s) below are not compatible with this option and cannot be selected: Smart Card Reader Built-in Unit Type M29 (417864)	005269MIU

Step 7: Supplies

Item/Description	Tips	Item #
Print Cartridge MP 3554Print Cartridge MP 3554 Unit Packaging: 1 Bottle (702 g) Yield (CTN): 24,000 pages Yield based on 6% coverage, 3 pages/job. Actual yields may vary based on types of images printed and other factors.	No tooltip available.	842124
Staple Set Type T for Internal Finisher SR3130/SR3210 (Normal Stapling)Staple Set Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) Unit Packaging: 5,000 per Crtg. (1 Crtg/Ctn) Yield (CTN): 5,000 pages Note: Internal Finisher SR3130 or Hybrid Finisher SR3210 must be selected to add this supply.	Staple Set Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) At least one of the item(s) below must be selected to be able to select this item: Internal Finisher SR3130 (417589) Hybrid Finisher SR3210 (417483)	415009
Staple Refill Type T for Internal Finisher SR3130/SR3210 (Normal Stapling)Staple Refill Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) Unit Packaging: 5,000 per Crtg. (2 Crtg/Ctn) Yield (CTN): 10,000 pages Note: Internal Finisher SR3130 or Hybrid Finisher SR3210 must be selected to add this supply.	Staple Refill Type T for Internal Finisher SR3130/SR3210 (Normal Stapling) At least one of the item(s) below must be selected to be able to select this item: Internal Finisher SR3130 (417589) Hybrid Finisher SR3210 (417483)	415010
Staple Set Type S for SR3220 (Normal and Saddle Stitch) Uses Type K RefillStaple Set Type S for SR3220 (Normal and Saddle Stitch) Uses Type K Refill Unit Packaging: 5,000 per Crtg. (1 Crtg/Ctn) Yield (CTN): 5,000 pages Note: Booklet Finisher SR3220 must be selected to add this supply.	Staple Set Type S for SR3220 (Normal and Saddle Stitch) Uses Type K Refill At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR3220 (417484)	412874
Staple Refill Type K for SR3220 (Normal and Saddle Stitch)Staple Refill Type K for SR3220 (Normal and Saddle Stitch) Unit Packaging: 5,000 per Crtg. (3 Crtg/Ctn) Yield (CTN): 15,000 pages Note: Booklet Finisher SR3220 must be selected to add this supply.	Staple Refill Type K for SR3220 (Normal and Saddle Stitch) At least one of the item(s) below must be selected to be able to select this item: Booklet Finisher SR3220 (417484)	410802
Marker Type 30Marker Type 30 Unit Packaging: 4 – Markers/Box Total: 12,000 Note: 1. Marker Type 30 cannot be installed with MP 2555 with SPDF, MP 3055 with SPDF, or MP 3555 with SPDF. 2. Fax Option Type M29 must be selected to add this supply. Marker Type 30 is a refill for ADF verification stamp, which places a small mark on each page scanned or sent in immediate Transmission Mode.	Marker Type 30 At least one of the item(s) below must be selected to be able to select this item: Fax Option Type M29 (418601)	334049